Some models done

Hello everyone! Long time since I last posted. Got some painting done after a while and decided to make a quick post.

I painted epic Irusk, it was a fun model to paint but it's just so damn small.

As a little side project I painted a Deneghra model as a test model. I have an army of Cryx in the closet waiting for an inspiration. I am probably going to paint them using metallic paints and using a lot of pigments etc. Deneghra was just a fast test piece for a way to paint the metallics. End results aren't actually anything to brag about but here it is anyhow:

I also recently put together Khadors Conquest which I am probably going to start painting pretty soon. Though first I would like to get some unfinished models done first.

Btw these pictures were taken with my new lightbox. They are ok but I really need to get a flash with some diffusers, as the amount of light just wasn't enough for models this small. But I will try and upgrade the quality of the pictures with different backdrops etc.

Cu.

Zombicide: Board game overview

Delivery guy woke me up this morning and carried a big box for me.
Inside the box was my copy of Zombicide. I backed this game up in the kickstarter for the abomination level. This is a game that didn't come cheap. First the abomination level + shipment to Finland took 125usd, and after that my copy ended up on the customs table and they made me pay ~24 euros taxes as extra.
Well, here's hoping the game shines and atleast it has a lot of stuff in it:

Zombicide basegame:

 Heroes:

Zombies sculpts:

Abomination extras: 

More Zombies! (Basegame comes with two sheets of zombies)

Extra "Mr Spiky" (basegame comes with one abomination)

Extra Heroes:

More dice. The white ones glow in the dark (uuuuuu spooky)

Size comparison:

I took some pictures with the miniatures next to a "standard sized" space marine. Now bare in mind though that the marine is in terminator-armor, which makes it a bit more bulky. The abomination is about the same size as this guy:

(This guy would probably make the game a bit one-sided though)

Thoughts:

All in all, game certainly has a bunch of nice stuff in there. Plastic they used for the miniatures is hard and the sculpts are done nicely. Miniatures are a bit smaller though than I inially thought.

Gameboards are printed on a very thick and durable cardstock, and they have some cool artwork on them. Same high quality applies to the small cards and the dices as well. Components-wise, I have zero complaints.

As far as the actual gameplay goes, I just got this so I haven't had a chance to play yet. I have read some promising reviews though. Should be fun, and probably fits those gamenights with a few beers thrown in the mix. :)

Atleast the cat got some enjoyment out of it allready:

 

Mage Knight: Board game Overview

I got Mage Knight the boardgame a while back. It's a game I think I don't have changes to play very often, but something just intriqued me enough to warrant a purchase for myself.
First edition of the game was also sold out very quickly, and from what I have read the second edition is also pretty much sold out now. (there are some shops that still have it in stock I am sure).
I have heard a rumor that a third printing of the game is due later this summer (july/august, but again, this is just a rumor, But it is definitely coming as it seems to be selling fast).

My copy of the game is of the second edition, although the editions seem to be pretty much identical.

Anyway, this is just an overview of the game and it's components:

Mage Knight -  Boardgame:

Game is being praised quite a lot lately on boardgamegeek. For those of you who haven't heard of it, it's a game where you take control of a powerful Mage Knight and explore the world. It has the basic RPG/adventure elements where you fight monsters and try to develop your character with better loot, spells etc before taking on the final challenges. It also includes some very interesting mechanics and has very little luck involved, so you have to rely on your decisions.

Game can be played cooperatively or competitive, and it can also be played as a solo game. (solo rules are included in the game).

Anyway, let's take a look at the components.

The box insert:

Fits pretty nicely. My only complaint about the insert is, that he cards are printed on a pretty thin stock so they need sleeves. And from the look of it sleeved cards are not going to fit on their place in the insert.

Mage Knights:

Miniatures are pre-painted, and the quality is what you see here. For a boardgame I think they are pretty nice out of the box. (I am tempted though to give them a wash or two and maybe some highlights.)

Game also comes with four miniature towers on Clix -bases. These towers represent cities that you can conquer in the game once you get powerful enough to take them on.

Tower:

Again, a drop of wash would show the details a bit better. These towers are on Clix-bases, the number showing the difficulty -level of the current city.

The cards, as I allready said are printed on a pretty thin cardstock so you might want to sleeve them. Artwork on the cards in my opinion is very nicely done.


Game is being played on hexacon tiles, which you place once you explore the land further. These tiles also have nice artwork, and they are of good quality and thick cardstock.

Map:

Game also comes with a lot of other stuff that I am not going to go on detail here, such as a bunch of tokens, custom dices, plastic crystals, etc. Everything in the box is of nice quality in my opinion, although nothing extraordinary.

All in all I am happy about my purchase components-wise, and I have a feeling I end up liking the game as these kinds of games usually interest me.
That being said I haven't actually played the game yet, so I can't give a deeper analysis just yet. If this is something you fancy, check out more about the game on boardgamegeek.com.


TabletopCop

Khador Gun Carriage

Wohoo it's finally finished!

Without further explanations, here it is:

It was fun to paint something bigger for a change. (Although the horses almost drove me nuts). It's pretty nice looking model and feels heavy once you pick it up.

I decided to paint it looking like it just came out of the factory, so I didn't put any battle damage on it. Only thing that I did was give it some dusting with black pigments, to simulate the guns residue getting everywhere.

Putting it all together once it was painted was a chore in itself. The carriage and horses are pinned with 8 pins to the base. One pin for every wheel and hoove that touches the ground. (and the horses are pinned to the carriage as well).

Spent so much time with this one that I think it's going to be included in most of my lists for a while. :p

Anyhow, fun model to paint and it definitely gives you some of that "centerpiece -model" feel.


TabletopCop

Picked up some Cygnar

Picked up some new stuff a while back after a long hiatus:

But the "big" thing is, that I yet again branched out to a new faction:

I just had to get the battlegroup as it was on sale. I am very tempted to get the Stormwall also as It's a great looking model.

I allready assembled the minis (minus the Ironclad), but I haven't started painting them yet. Have to decide what kind of bases I want to do to them first. :)

Stryker is a very nice sculpt, I am pretty impressed on Privateer Presses plastic minis.

Right now my mind is set to finish my gun carriage before I start anything new. It's pretty far along, I just need to do some basing and highlights etc.

A lot going on regarding the boardgames also, as I recently acguired some new stuff. More on those later in more detail.

Anyhow, still alive and kicking. Just been very busy lately. (Man I am so waiting for my vacation, still have to wait for two weeks though).


TabletopCop

Diablo 3 - Collectors edition

It arrived!

Don't think I will be able to paint any miniatures atleast in the next few days. :p

I got the CE -version of the game. It has a lot of cool stuff:

The skull is pretty small but nicely sculpted. The paintjob is done just by drybrushing, so I might end up putting some paint on this also. The soul-stone clicks nicely on its place with a magnet.

The other content:

I don't dare to look at the artbook or the behind the scenes as I am afraid of spoilers. The book is big, and as you can see it has a hard cover which is nice.

Started playing with a barbarian. Awesome game, go get it now! :)


TabletopCop aka Orsus the barbarian.
(Yes, in the spirit of the butcher of Khardov) :p

Harder & Steenbecks Infinity Solo -airbrush

A little spotlight on the airbrush that I am using to paint my miniatures.

About a year/year and a half ago I decided to get an airbrush. I read a lot of info on different airbrushes but eventually I got Harder & Steenbecks: Infinity Solo airbrush. (I first noticed it when Les from Awesomepaintjob.com used it in one of his videos).

It comes with incredibly small 0,15mm nozzle. You can paint very small areas with it which fits miniature-painting perfectly. Downsize in this ofcourse is that it chokes up rather easily, so you have to keep the concistency on the paint very thin. I have a few most used paints in different pots, but usually I just mix up my paints straight in the cup. Few drops of water and a drop of paint, and sometimes a drop of retarder to longen the drying-time.

I only have the 2ml paint cup for this, but it has been more than enough on my projects.

It's not the cheapest of airbrushes but you get what you pay for. So if you are looking for a A-grade airbrush I can whole heartedly recommend this one. (There are multiple A-grade airbrushes to choose from but this one is the only one I have personally used).

Pics of the airbrush:

Now a good quality airbrush ofcourse needs a steady stream of air to support it.
I paint inside my "computer room" -so I needed it to be as silent as possible and it had to be indoor-usable. Small size is also a plus so I can store it away. This ruled out the big ones with a tank.

Eventually I got a Sparmax -compressor which is made for airbrushing:

I didn't notice to put anything next to it to give a size comparison, but it is small. Since it doesn't have a tank it's always on when I paint, but it's pretty silent. It has a regulator for the airflow, and a moisture trap fitted out of the box which is nice. So far it has been working perfectly for my needs.


Airbrush is a great tool in miniature painting. It takes some practice but It's easy to set up and get going once you get the hang of it.

Thx for looking, and if you have any questions feel free to drop a comment. :)


TabletopCop